Cannon VB-C500VD Guia de Configuração descarregar pdf (Página 56)

1-42

IPsec Settings (IPsec)

 If [ESP] or [ESP and AH] was set under [Security Protocol] in (5), the following items must be

set.

(8) [SA ESP Encryption Algorithm]

Select [AES], [3DES], [DES] or [NULL] as the ESP encryption algorithm according to the

encryption algorithm supported by the device to connect to.

Normally [AES] or [3DES] is recommended.

(9) [SA ESP Authentication Algorithm]

Select [HMAC_SHA1_96], [HMAC_MD5_96] or [No Authentication]as the ESP authentication

algorithm according to the authentication algorithm supported by the device to connect to.

If [ESP] is used alone, [No Authentication] cannot be selected.

(10)

[SA ESP Encryption key (outbound)]

Set the SA encryption key for outbound . If [AES], [3DES] or [DES] was selected in (8), set a

128-bit, 192-bit or 64-bit hexadecimal, respectively. [This item need not be set if [NULL] was

selected.

(11)

[SA ESP Authentication key (outbound)]

Set the SA authentication key for outbound . If [HMAC_SHA1_96] or [HMAC_MD5_96] was

set in (9), set a 160-bit or 128-bit hexadecimal, respectively. This item need not be set if [No

Authentication] was selected.

(12)

[SA ESP SPI (outbound)]

Set the SA SPI value for outbound. Set a desired value in a range of 256 to 4294967295.

(13)

[SA ESP Encryption key (inbound)]

Set the SA encryption key for inbound. If [AES], [3DES] or [DES] was selected in (8), set a

128-bit, 192-bit or 64-bit hexadecimal, respectively. This item need not be set if [NULL] was

selected.

COPY

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 159 160

Sem comentários

Cannon VB-C500VD Guia de Configuração Página 56